How to Flash STOCK ROM on Galaxy Y S5360

HOW TO INSTALL OR FLASH STOCK
ROM ON GALAXY Y
WHAT TO PREPARE?
1. DOWNLOAD ODIN s5360
Here
(Extract after download)
2. USB CABLE of your galaxy Y.
3. PC or laptop running windows or
later OS.
4. Your Galaxy Y GT s5360 device.

PREPARATION BEFORE FLASHING

1. Back-up all your important files
from your device, like contacts,
messages etc.
(Flashing will wipe all your data).
2. Ensure that your phone is fully
charge or above 50% charge. (If your
phone had an auto-shutdown
history, and its too old, use a newer
or good working battery.
3. Remove the SIM card and the
external memory card. (not
necessarily but recommended to
avoid any certain issues)
4. Hard Reset - We often do hard
reset before flashing to clean the
memory cache of the phone. Master
reset code *2767*3855# .

TUTORIAL

Setting up the Samsung Galaxy Y
into Download Mode and
Connecting to PC.
CONNECT YOUR SAMSUNG GALAXY Y
GT S5360 TO YOUR PC USING USB
CABLE

1.You need to set the device into
download mode in order to let Odin
recognize it. To set into download
mode
Turn OFF the phone, then hold and
press the three buttons Volume
Down + Home + Power Key
simultaneously, you are then opted
into download mode screen use the
Volume Up button to proceed. If
you'll still not get into download
mode, remove the battery a couple
of seconds then put it back again
and then press the download mode
button combination again.
2. RUN ODIN downloader  on your
PC desktop or LAPTOP.
3. Load the firmware in the
designated button spaces.
PIT - "totoro_0623.pit"
BOOTLOADER - "BOOT" file.
PDA - "PDA" file.
PHONE - "MODEM" file.
CSC - " GT-s5360-MULTI-CSC" file.
RE-PARTITION, AUTO REBOOT, F.
RESET TIME ARE ALL CHECKED.
Once the phone displays the
Android robot and says
"Downloading..." Connect the phone
to PC with the supplied USB cable.
Odin will automatically recognize it
if it's properly connected, the
ID:COM mapping will highlight to
color yellow and says "added" on the
log box.
Start Flashing
Hit the "Start" Button when all are
set perfectly to begin flashing.

CAUTION: Avoid touching the
phone while the flashing already
started, any interruption will result
into serious issues like soft-brick or
hard-brick.
Let the flashing completes, a
progress bar displays until the
firmware downloading process
finishes It only takes around 3 to 5
minutes, depends of your PC speed.
When a word "PASS" appears, it
means that the flashing is
successful. The phone will then
reboot and after completely
rebooted it is now safe to remove it
from computer's connection.

AFTER flashing, language selection
will prompt after the reboot. Choose
language depending on your choice.
because the default language will be
in Indonesian